bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 18, 2010 13:04:39 GMT 2
LHF wheel bearing failure, it seems the nut came undone 1 to 1 1/2 turns Attachments:
|
|
|
Post by marius on Oct 18, 2010 14:24:09 GMT 2
Hi Bobby
That is surely not fun at all. Is it the standard nut that came undone?
Regards Marius
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 18, 2010 22:16:42 GMT 2
Yeah standard nut, I guess I didnt peen it enough..... I guess
|
|
|
Post by Charles on Oct 18, 2010 22:26:46 GMT 2
Do you use locktite aswell?
Charles
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 18, 2010 23:09:48 GMT 2
I do now!!!!!!
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 19, 2010 11:05:29 GMT 2
I have decided to swap around the splines in the centre diff to try and get rid off some of the play at the T/C rear output shaft and found this wear on the centre shaft in the diff. It never stops!! Attachments:
|
|
|
Post by ronnie on Oct 19, 2010 12:19:52 GMT 2
Hi Bob That does not look good Ronnie
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 19, 2010 13:20:57 GMT 2
Its not bad, I just dont plan to open up the T/C for a long time, if it was something that got played with often I would let it slide for a bit longer
|
|
|
Post by marius on Oct 19, 2010 14:56:19 GMT 2
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 20, 2010 12:05:49 GMT 2
Inside the hub. The original nuts are dirt cheap here,dirt cheap! Attachments:
|
|
|
Post by marius on Oct 20, 2010 12:24:32 GMT 2
Hi Bobby It sounds like you guys are well sorted over there Unfortunately we have our work cut out for us Regards Marius
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 20, 2010 12:47:36 GMT 2
Yep easy as here, need parts? ring Andy, They turn up in the mail along with an invoice with amazingly cheap prices on!
|
|
|
Post by marius on Oct 20, 2010 13:18:56 GMT 2
Hi Bobby The cheapest way we can get parts is through direct import from Russia and the old Eastern Block countries. Unfortunately the Aussie $ is too strong for us Regards Marius
|
|
bobbyd
Veteran Niva Petrol Head
Posts: 575
Registered: Oct 11, 2009 11:58:35 GMT 2
Karma: Exalt | Smite
|
Post by bobbyd on Oct 21, 2010 11:59:45 GMT 2
Check this out, I just got a Frt wheel bearing kit from Andy, 2 bearings, 2 seal, and nut... 80AUD
|
|