snakeman
New Niva Petrol Head
Posts: 12
Registered: Jun 12, 2013 18:54:51 GMT 2
Karma: Exalt | Smite
|
Post by snakeman on Aug 22, 2013 10:03:39 GMT 2
I need to replace my clutch. Can someone please supply me with part numbers for clutch plate, pressure plate and release bearing. will not be doing the job myself but need to gfive info to the mechanic in order to get the right parts
|
|
Ihar
Moderator
Lada Niva Driver
Honour thy forefathers and drink beer, they did
Posts: 1,520
Location: Gauteng
Town: Roodepoort
Registered: Mar 4, 2011 17:30:11 GMT 2
Karma: Exalt | Smite
|
Post by Ihar on Aug 22, 2013 11:17:24 GMT 2
Hi For clutch and release bearing issues, see this thread - locsa.proboards.com/post/2880/thread where I will be moving this thread in a few days. Just impress on your mechanic that he needs to align everything properly afterwards - GB and TC. If you have no vibrations now, it is best to spraypaint over the mountings for GB and TC so they can be fitted to the same spots again. Part number - Valeo ld01 but try to get the LUK equivalent as in my opinion the LUK has the better release bearing (ensure that the kit you get has a release bearing). While you are busy with everything out, you may as well replace the thrust ring between the GB and bell housing as well as it saves having to strip everything out again when it does go. In doing this, you may as well drain and replace the GB oil as it will more than likely leak out when you take off the bell housing. I have a thrust ring for sale if you need one, or contact Vents (spare parts suppliers) for one. Tjeers Steve
|
|